Install the "RED" cable from the breaker to the positive post
of battery #4.
Battery 4
+
Battery 1
-
Battery 2
Battery 3
Install the "BLACK" cable from the negative main power
post to the negative post of battery #1.
Battery 1
Battery 3
Battery 2
Carefully remove the wooden prop rod, place inside the
hull, and lower the boat top until it's fully closed.
Check the volt meter display.
If the meter is not displaying 24 volts, check the breaker.
If the breaker is "on", then the battery wiring will need to be
rechecked.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com