J&J Amusements Bumper Boat 2014 Service Manual page 120

3-32
GLOVES
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
BACK SUPPORT
BELTS
WE HAVE MANY OF THE PROTECTIVE CLOTHING
ITEMS YOU NEED IN STOCK!
Protect yourself with the right protective wear. Mechanix wear: it's what the
mechanics wear!
Install the drive shaft housing bushings.
Install and tighten the pivot bracket nuts to 20 ft. lbs.
If the pivot bracket nuts are over-tightened, binding of the
Finish by installing the allen-cap-headed screws.
Make sure to have the flex wire cable clamps in the correct
(see flex wire removal on page 3-8).
Install the pivot and bushings.
Install the pivot shield.
<WARNING>
pivot assembly may occur.
position
KNEE PADS