J&J Amusements Bumper Boat 2014 Service Manual page 38

1-4
Hold the inside nylock nut during the next step.
Remove the bolts.
Carefully remove the breaker.
NOTICE:
Inspect wires and connections for corrosion/ damage.
Clean off any corrosion from cable ends, and
apply corrosion block on the cable ends before re-installing.
Replace as needed.
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR TECH-
NICAL INFORMATION RELATED TO OUR PRODUCTS.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com