J&J Amusements Bumper Boat 2014 Service Manual page 112

3-24
Remove the 5/16" bolt that secures the relay to the motor
housing and remove the relay.
Install the new relay.
<CAUTION>
Use only a 5/16" x 1/2" bolt with; lock and a flat washer. This
is necessary in order to keep the bolt from causing internal
damage to the motor.
Crimp the 10-gauge butt connector to the black wire lead.
Install the leads to the corresponding negative and positive
posts
(see wiring diagram on page 4-19).
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com