J&J Amusements Bumper Boat 2014 Service Manual page 37

BREAKER SWITCH (Electric only)
Battery 1
Battery 2
Power post, pre -2012
2 unit fiberglass CHARGER ENCLOSURES.
part # 2-80-A00062.
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
Battery 4
Battery 3
Your J&J Blaster Boat may be equipped with one of two types of power
rectangular-style post that contains both the negative and positive feeds.
Power post, post-2012
When breaker is in the off position, there will be no reading
displayed on volt meter, (The volt meter will display 0 volts)
Disconnect the (-) negative cable from battery #1.
Disconnect the (+) positive cable leading to the breaker from
Disconnect the (+) positive cable leading to the breaker from
The Pre-2012 version utilizes two rounded-style posts;
one for the positive feed and one for the negative feed.
Blaster Boats built during the 2012 model year changed to a single,
All power goes through breaker.
and the batteries cannot be charged.
REMOVAL/INSTALLATION.
the power post.
503-304-8899
1-3
NOTICE:
battery #4.
Note:
posts.