Battery-Fill Quick-Release Coupler (Electric Only) - J&J Amusements Bumper Boat 2014 Service Manual

1-30
BATTERY-FILL QUICK-RELEASE COUPLER
STRAIN RELIEF
This combination strain relief and plug end protector has an easy
to grab hand hold for connecting and disconnecting SB-120
charger plugs from your bumperboats. No more broken plug ends
from charger leads being dropped on the ground.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
The battery filling system allows easy top-off of the battery
water level from the outside of the boat. Simply attach the
battery fill squeeze bulb (J&J#2-70-A0021C) to the access
port on the back of the boat top to fill all the batteries to
equal levels.
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
Hold the quick-release coupler from outside so it doesn't
spin while loosening the inside nut.
Remove the hose from the coupler.
Loosen and remove the plastic nut.
Remove the coupler from the outside of the boat top.
Loosen the hose clamp.
(J&J #2-70-0108)
2-70-0211