J&J Amusements Bumper Boat 2014 Service Manual page 73

BOAT HALF PROTECTOR (Electric only)
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
Silicone
MARINE GOOP ADHESIVE #013331; the PERFECT SOLUTION
TO ATTACH BOAT HALF PROTECTOR.
Unscrew the clamps and remove the protector.
Carefully remove and clean any silicone from the
Install the protector and tighten the clamps securely.
Apply silicone between the boat hull and protector.
(For best results, use J&J #013331.)
Let the silicone cure before putting the boat back in
Curing time varies depending on outside tempera-
ture and amount of silicone used
(see silicone instructions for details).
2-5
boat hull.
service.
Note:
503-304-8899