J&J Amusements Bumper Boat 2014 Service Manual page 80

2-12
BATTERY-FILL KIT INSTALLATION (Electric only)
Remove the caps from the batteries and place aside for later
use.
Remove the manifold valves from the hose T-fittings.
Loosely install the manifold valves into the batteries.
Make sure the manifold valves are flush with the battery be-
fore tightening.
Manifold Valve
Push the hose T-fittings into the manifolds.
Use equal pressure until the fittings snap into place.
NOTICE Be careful not to damage the T-fitting o-ring.
TECH TIP: Wet the T-Fitting with distilled water to help it slip
more easily into the manifold.
NOTICE Twist the manifolds slightly to remove any kinks in
the water lines. All kinks must be removed for the watering
system to function correctly.
Install the filler tube from the boat hull to fill the system.
Push and slightly twist the hose to install.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com