J&J Amusements Bumper Boat 2014 Service Manual page 54

1-20
Drill through the outside of the trim by matching the
existing rivet holes.
Insert rivets through the trim.
Install a backing washer on the inside of each of the
rivets.
Install the rivets to boat top.
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com