Major Electrical Components - J&J Amusements Bumper Boat 2014 Service Manual

MAJOR ELECTRICAL COMPONENTS

J&J battery-powered bumper boats utilize a simple 24VDC circuit containing the power pack, consisting of four 6VDC
deep-cycle, 225 amp hour batteries wired in a series.
The cables and wire harnesses connect the components in the circuit.
NOTICE: Any replacement cables or wiring must meet or exceed OEM standards for wire gauge and quality.
When replacing connectors, it is always best to use heat-sealing items. Due to the size and difficulty of effectively crimping
the SB terminal lugs, J&J recommends replacement of the entire harness end that is affected by the problem.
VOLTS
Black to negative (-) White to positive (+)
10/2 Cable
to charger g g
#2-70-A0017
Battery
-
Battery
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
VOLT
Fuse
METER
#2-70-0103 (Fuse holder)
#2-70-0149
#2-70-0104 (Fuse)
50 amp breaker/switch
#2-60-0102
White White
Power post ower post
#2-70-0153
Black Black
Female connector
male connector
Battery
Bilge
pump (24V)
#2-70-A0044
-
Battery
Power post,
negative junction
Battery
-
Battery
10/2 Cable 0/2 Cable
to motor o motor
White White
Black
50 amp breaker/switch
#2-60-0102
Battery
Battery
2-70-A0011
503-304-8899
4-7