Motor Assembly; Motor Installation - J&J Amusements Bumper Boat 2014 Service Manual

0-32

MOTOR INSTALLATION

503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
CORROSION SOLUTION! CORROSION BLOCK PRODUCTS
AVAILABLE AT J&J.
Have a helper carefully pass the motor assembly to the
Check the engine and gear box oil level before installing.
"Refer to the Honda owner's manual "
Position the lower unit of the motor so the prop guard will
clear the motor pivot. Carefully lower the motor through
the hole. Align the motor to the motor pivot and slide
down into place. There is an index hole and pin that need
to be aligned for proper positioning.
NOTE: For electric powered boats only.
Treat all SB120 plug terminals with corrosion block (J&J
Connect the blue SB120 plug from the boat hull into the
Boats equipped with remote shut down (Boat Captain sys-
tem) will need the system to be activated from the transmit-
person in the boat.
GAS ENGINE
part #99109).
blue SB120 plug on the motor.
NOTICE
ter before the boat
can operate.