J&J Amusements Bumper Boat 2014 Service Manual page 12

Bumper boat 2014
Table of Contents

Advertisement

0-12
MONTHLY SERVICE SCHEDULE (Gas)
Below are explanations of service listed in the monthly maintenance charts on previous page.
Explanations of monthly maintenance shall include, but are not limited to the following:
1. ENGINE:
Always use API service SG.SF/CC.CD. designation shown on the container; see "Engine Oil" in the Honda Shop
Manual.
2. GEAR CASE:
Always use API service SG.SF/CC.CD. designation shown on the container; see "Engine Oil" in the Honda Shop
Manual.
3. SPARK PLUG:
Clean and replace spark plugs with the type listed in the Honda Shop Manual.
4. VALVE CLEARANCE:
Check and adjust at the specified intervals; see the Honda Shop Manual.
5. IDLE SPEED:
Check and adjust at the specified intervals; see the Honda Shop Manual.
6. CARBURETOR LINKAGE:
Check and adjust at the specified intervals; see the Honda Shop Manual.
7. FUEL TANK & TANK FILTER:
Check and replace at the specified intervals; see the Honda Shop Manual.
8. FUEL LINE:
Check and replace at the specified intervals; see the Honda Shop Manual.
9. STARTER ROPE:
Check and replace at the specified intervals; see the Honda Shop Manual.
10. PROPELLER GUARD: Inspect for damage or foreign materials. Replace if damaged.
‹ SAFETY ITEM › ***WARNING: DO NOT OPERATE IF PROPELLER GUARD IS DAMAGED OR MISSING***
11. HULL: Keep clean and wax every 200 hours or every 2 months. Use a UV protectant weekly to reduce color fading
(J&J part # 3-60-0034).
12. ANODE: Clean monthly. For year-round parks, replace anode every 6 months. For seasonal parks, replace anode
at end of the season.
13. PIVOT: Turn motor and check for smooth operation. If motor doesn't turn easily, visually inspect pivot and grease
if necessary. Electric motor can turn 270°. Motor stops must be in place and in working order.
14. TUBE: Clean with mild detergent. Check condition of tube daily. Check tube pressure weekly using low pressure
gauge (J&J #3-96-0024) and set pressure to 2-3 PSI.
NOTE: ALL NECESSARY REPAIRS NEED TO BE DONE BEFORE BOAT IS OPERATED. USE J&J AMUSEMENTS OR
EQUIVALENT REPLACEMENT PARTS. INSPECTIONS SHOULD BE DONE BY TRAINED AND QUALIFIED PERSON-
NEL.

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for J&J Amusements Bumper Boat 2014

This manual is also suitable for:

Electric-powered blaster boatGas-powered water bug

Table of Contents