Magnetic Trigger - J&J Amusements Bumper Boat 2014 Service Manual

3-20

MAGNETIC TRIGGER

503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
Remove the motor cover and neoprene protector
Remove the magnetic trigger by removing the 1/4" shoulder
Inspect the nylon bushing and shoulder bolt.
Align the rode with the slot in the handlebars.
Make sure the magnet in the trigger is pointed down, facing
NOTICE: Mounting the magnet upside down will result in a
poor or nonfunctional sold state switch.
(see page 3-3).
bolt with an allen wrench.
Replace as needed.
the solid state switch.
Tighten the shoulder bolt.
Tighten the shoulder bolt.