The pivot is attached with 8 bolts and nylock nuts, and 16 flat
washers.
REMOVAL/INSTALLATION
Remove the bolts, nylock nuts and washers.
Install a new pivot by using the existing holes.
Replace the hardware with new hardware as needed.
ID PLATE:
Remove the ID plate from the old pivot.
Install the ID plate to the new pivot with 4 stainless steel
rivets.
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com