Use an adjustable wrench and squeeze the spring clamp.
Slide the clamp down the hose.
Pull and slightly twist the hose to remove.
Use a flat-blade screwdriver and turn clockwise to remove
the nozzle from the motor cover.
NOTICE
The nozzle is threaded opposite of standard screws- tighten
and loosen with this in mind.
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com