Handle Bar - J&J Amusements Bumper Boat 2014 Service Manual

5-2

HANDLE BAR

The Honda steering handle, throttle assembly and hardware is removed from the engine. The three stock extension
case bolts (30mm) are removed and replaced with longer bolts (35mm) to mount the J&J handle bar. Also the handle
bar is bolted to the stock steering handle mount with a shorter bolt (20mm) and a rubber cover ziped tied to the handle
bar. The Honda throttle assembly is reused and installed to the J&J handle bar, "Refer to the Honda shop manual for
repairing, troubleshooting and maintaining the throttle system".
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
ELIMINATE WATER/FUEL PROBLEMS
Whether you are storing fuel, operating a boat, motorcycle, lawn mower, ATV,
personal watercraft, snow blower, generator, or other machinery, you need the Water Eliminator, the
most cost effective way to remove water from gasoline, diesel, fuel oil, kerosene or hydraulic fluid.
Easy to use, just clip the Water Eliminator to your fuel cap and lower it into the tank. The unit will
remove any water it contacts, leaving you with dry fuel. By removing water directly from fuel, it
helps to prevent many service problems related to water contamination including: Plugged fuel
filters, fuel line freeze up, carburetor icing, damaged fuel pumps and injectors, growth of algae,
corrosion, loss of power and down time. Requires a 1.15" fuel filler opening.