J&J Amusements Bumper Boat 2014 Service Manual page 77

2-9
Remove the two 10-24 nylock nuts.
NOTICE:
Replacement of the pump mount and screen is needed only if
damaged.
Remove the bilge pump mount from the hull.
To disconnect the output hose, remove/loosen the plastic
hose clamp.
Pull and slightly twist the hose to remove it from the pump.
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com