J&J Amusements Bumper Boat 2014 Service Manual page 123

3-35
PROP AND GUARD
Remove the prop guard cover.
With a punch, carefully remove the roll pin from the
prop.
Pull the prop off of the shaft.
Remove the prop guard backing plate.
Reinstall the prop guard backing plate.
Slide the prop onto the shaft, taking care to line
up the prop holes with the corresponding holes on
the shaft.
Use an awl or suitable drift pin to help align the
holes.
Using a new, stainless steel roll pin, tap in with a
hammer and punch until it is flush with the prop.
Install the prop guard.
VISIT WWW.JJAMUSEMENTS.COM/TECHNICAL/INDEX.HTM FOR
TECHNICAL INFORMATION RELATED TO OUR PRODUCTS.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com