Sb-120 Terminal Replacement - J&J Amusements Bumper Boat 2014 Service Manual

SB-120 TERMINAL REPLACEMENT

CORROSION SOLUTION! CORROSION BLOCK PRODUCTS
AVAILABLE AT J&J. 12 OUNCE AEROSOL - #99101
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
NOTE: SB-120 ASSEMBLY DOES NOT CONTAIN
CLEAR POLY VINYL TUBING # 2-60-0094
<<WARNING>> You must first disconnect the nega-
tive battery pack cable from the power post. DO NOT
WORK ON CABLES THAT ARE STILL CONNECTED TO
Terminals can be removed by pushing down on the
housing clips and pulling on the cable.
Remove the cable shielding back 1-1/2"
Strip the wire shielding back 3/4".
Insert the terminal contacts and crimp the terminal to the
wire using a hydraulic crimp tool, such as Central Hydrau-
Note: Attempting to to crimp new terminals with a vise/
hammer, etc. will result in a poor connection.
Part # 2-70-A0022 includes:
Strain relief (2)
Terminal contacts (2)
6-32 nylock nut (1)
6-32 machine screw (1)
10-32 nylock nut (2)
10-32 x 3/4 pan head screw (2)
SB-120 housing (1)
POWER.
lics from Harbor Freight.
503-304-8899
3-43