J&J Amusements Bumper Boat 2014 Service Manual page 16

0-16
Pre-Opening Checklist - Explanation (Gas)
Below are explanations of service listed in the Pre-Opening Checklist chart on previous page.
Explanations of Pre-Opening Checklist shall include, but are not limited to the following:
BOATS:
TUBE - Check air pressure using a high-quality, low-pressure gauge. Super Tube should be inflated to 2-3 PSI.
HULL - Check for cracks and missing hardware.
.
RECEIVER - Check for loosening or missing hardware, and cracking around mount.
HANDRAILS & HARDWARE - Check for loosening and missing hardware.
WATER IN HULL - Drain if excessive water is present inside hull.
ENGINE:
ENGINE & GEAR CASE - Visually and physically check engine operation, grips, handlebar condition and abnormal
noises during operation.
THROTTLE: Check for smooth operation and full return when released.
FUEL SYSTEM: Check for any signs of fuel leaks from the tank, cap, fuel filter, etc. If no leakage, top off fuel tank.
PIVOT - Check for smooth operation by rotating motor.
PROP GUARD - Check for damage and foreign material.
‹ WARNING › ***DO NOT OPERATE IF PROPELLER GUARD IS DAMAGED OR MISSING***
NOTICE: ALL NECESSARY REPAIRS NEED TO BE DONE BEFORE BOAT IS OPERATED. USE OF J&J AMUSEMENTS
OR EQUIVALENT REPLACEMENT PARTS IS RECOMMENDED. INSPECTIONS SHOULD BE DONE BY QUALIFIED
PERSONNEL.