Boat Launch Procedure - J&J Amusements Bumper Boat 2014 Service Manual

0-31

BOAT LAUNCH PROCEDURE

Install the boat & dock rail hooks as described in the dock
rope installation on page 1-12.
Carefully move the boat to the edge of the pond.
NOTICE
Make sure to move the boat with the box lid underneath it to
prevent damage.
‹ CAUTION › This is a two-person job. Do not try to launch a
bumper boat with only one person.
Carefully slide the boat assembly (without the motor) into the
pond.
Inspect the boat and latch the boat hooks to the dock rails.
Latch the dock ropes to the dock rails and the boat to secure
the boat to the dock rails. There should be two ropes and two
dock rails per boat.
CHECK TUBE PRESSURE EASILY & ACCURATELY
WITH THE LOW-PRESSURE GAUGE #3-96-0024
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com