J&J Amusements Bumper Boat 2014 Service Manual page 83

2-15
Use a tire inflator to fill the tube.
VACUUM/BLOWER INFLATOR
Open the tube valve and cover it with an inflator hose.
Turn the blower on to fill.
Inflate the tube to the recommended 3 PSI.
Check it with a low-pressure gauge.
Before returning the boat to service, check the valve for
leaks by applying a solution of soapy water.
If bubbles form, valve needs to be tightened.
With the tube inflated, insert the valve tighter and turn the
nut 1/8th turn.
Re-check with the soapy water solution. Repeat as needed
until no bubbles form.
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com