J&J Amusements Bumper Boat 2014 Service Manual page 118

3-30
PIVOT
503-304-8899
Specifications subject to change without notice - Check our website for valuable information including videos, workshop and operations manuals. www.jjamusements.com
corrosion resistant thread compound, such as Loctite® Marine
Index tabs
CORROSION SOLUTION: CORROSION
BLOCK PRODUCTS AVAILABLE AT J&J.
12 OUNCE AEROSOL - #99101
Place the motor upside down with the motor cover removed.
Note the placement and use of the flat washers
Make sure that all threads are treated with anti- galling and
NOTICE: The UHMW plastic split insert has index tabs; this
is done so it remains static, and the pivot turns, plastic-on-
Remove the pivot and insert bushings.
Remove the six allen-cap screws.
Next, remove the four 5/16" nuts.
and spacer sleeves.
Grade Anti-Seize.
Remove the pivot shield.
Remove the pivot bracket.
plastic, during operation.
Insert bushing
Index tabs
Index tabs