Table of Contents
Advertisement
28
BATTERY FILL KIT INSTALLATION (Electric only)
Specifi cations and prices subject to change without notice. Download latest update to this manual on-line.
Manifold Valve
Twist the manifolds slightly to remove any kinks in the water lines. All
visit www.jjamusements.com and download a copy of our complete
accessory catalog!
Remove the caps from the batteries and place aside for later use.
‹ WARNING ›
Wear protective (rubberized) gloves when
handling batteries. Avoid contact with battery acid.
Remove the manifold valves from the hose T-fi ttings.
Loosely install the manifold valves into the batteries.
Make sure the manifold valves are fl ush with
Push the hose T-fi ttings into the manifolds.
Use equal pressure until the fi ttings snap into place.
Be careful not to damage the T-fi tting o-ring.
TECH TIP:
to help it slip into the manifold more easily.
kinks must be removed for the watering system to function correctly.
Install the fi ller tube from the boat hull to the fi ll system.
Push and slightly twist the hose to install.
the batteries before tightening.
NOTICE
Wet the T-Fitting with distilled water
NOTICE
Advertisement
Chapters
Table of Contents
