Motor Installation - J&J Amusements 24v 1750 rpm Service Manual

32

MOTOR INSTALLATION

Have a helper carefully pass the motor assembly to the
person in the boat.
GAS ENGINE
Check the engine and gear box oil level before installing.
"Refer to the Honda owner's manual "
Position the lower unit of the motor so the prop guard will clear
the motor pivot. Carefully lower the motor through the hole. Align
the motor to the motor pivot and slide down into place. Th ere is an
index hole and pin that need to be aligned for proper positioning.
NOTE:
For electric powered boats only.
Treat all SB120 plug terminals with corrosion block (J&J part #99109).
Connect the blue SB120 plug from the boat hull
into the blue SB120 plug on the motor.
NOTICE
Boats equipped with remote shut down (Boat Captain system) will
need the system to be activated from the transmitter before the boat
can operate.
CORROSION SOLUTION! CORROSION BLOCK PRODUCTS
AVAILABLE AT J&J.
Specifi cations and prices subject to change without notice. Download latest update to this manual on-line.