Boat Launch Procedure - J&J Amusements 24v 1750 rpm Service Manual

31

BOAT LAUNCH PROCEDURE

Install the boat & dock rail hooks as described in
the dock rope installation on page 1-12.
Carefully move the boat to the edge of the pond.
NOTICE
Make sure to move the boat with the box lid
underneath it to prevent damage.
‹ CAUTION ›
Th is is a two-person job. Do not try to
launch a bumper boat with only one person.
Carefully slide the boat assembly (without the motor) into the pond.
Inspect the boat and latch the boat hooks to the dock rails.
Latch the dock ropes to the dock rails and the boat to secure the boat to
the dock rails. Th ere should be two ropes and two dock rails per boat.
CHECK TUBE PRESSURE EASILY & ACCURATELY
WITH THE LOW-PRESSURE GAUGE #3-96-0024
phone: 1-800-854-3140 | 1-503-304-8899 fax: 1-800-366-7505 | 1-503-304-1899 www.jjamusements.com