Magnetic Trigger - J&J Amusements 24v 1750 rpm Service Manual

3-20

MAGNETIC TRIGGER

Specifi cations and prices subject to change without notice. Download latest update to this manual on-line.
Remove the motor cover and neoprene protector
Remove the magnetic trigger by removing the
1/4" shoulder bolt with an allen wrench.
Inspect the nylon bushing and shoulder bolt.
Align the rode with the slot in the handlebars.
Make sure the magnet in the trigger is pointed
down, facing the solid state switch.
Tighten the shoulder bolt.
NOTICE:
Mounting the magnet upside down will
result in a poor or nonfunctional sold state switch.
Tighten the shoulder bolt.
(see page 3-3).
Replace as needed.