Download  Print this page

Advertisement

Table of Contents
Maintenance
Unscrew and remove the cartridge en-
gine oil filter «4».
Unscrew and remove the oil drainage
plug «3» and then drain all the engine
oil into the collecting container.
Fit a new oil cartridge filter «4» and
take special care to lubricate the filter
sealing O-rings with oil.
Screw and tighten the engine oil drain-
age plug «3».
Pour approx. 1100 cm³ (67.12 cu.in)
through the fill opening.
Screw and tighten the measuring cap-
dipstick «1».
Start the engine and let it run for sev-
eral minutes.
Stop the engine and let it cool down.
Check the engine oil level.
CAUTION
USED OIL CONTAINS SUBSTANCES THAT ARE HARM-
FUL TO THE ENVIRONMENT. DISPOSE OF USED OIL AC-
CORDING TO THE REGULATIONS IN FORCE.
Check
ENGINE OIL CHECK
Park the vehicle on firm and level ground.
Rest the vehicle on its centre stand.
CAUTION
WAIT SOME MINUTES UNTIL THE ENGINE AND THE EXHAUST SYSTEM ARE COLD.
Stop the engine and let it cool down. This will allow the oil to settle into the crankcase and cool down.
NOTE
FAILURE TO FOLLOW THESE OPERATIONS MAY RESULT IN AN INCORRECT READING OF
THE ENGINE OIL LEVEL.
MAIN - 39

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: