Suspensions
Check the tyre conditions.
CAUTION
CHECK TYRE TREAD FOR WEAR. BADLY WORN TYRES
COMPROMISE TRACTION AND VEHICLE HANDLING.
REPLACE TYRES WHEN WORN OR IF THERE IS A PUNC-
TURE BIGGER THAN 5 MM IN THE TREAD. SOME TYRE
TYPE-APPROVED FOR THIS VEHICLE FEATURE WEAR
INDICATORS. CHECK THAT THE INFLATION VALVES «1»
HAVE THEIR CAPS FITTED IN ORDER TO AVOID UNEX-
PECTED FLAT TYRES.
BALANCE THE WHEEL AFTER A TYRE IS MENDED.
Refitting the front wheel
For refitting, follow the operations in reverse order observing the tightening torque.
Handlebar
Removal
•
Remove the front handlebar cover (SEE INSTRUMENT PANEL)
•
Remove the rear handlebar cover (SEE INSTRUMENT PANEL)
•
Remove the internal front shield
•
Remove the clamps
NOTE
USE NEW CLAMPS FOR REFITTING.
•
Undo and remove the two screws.
•
Remove the U-bolt and slide off the
rear brake pump; keep it connected to
the oil pipe.
SUSP - 191