Safety Specifications; User Interface - Derbi Rambla 250 Manual

Table of Contents

Advertisement

Electrical system

SAFETY SPECIFICATIONS

CAUTION
REMEMBER THAT THE ELECTROLYTIC FLUID CONTAINS
SULPHURIC ACID. AVOID CONTACT WITH YOUR SKIN OR
CLOTHES AND KEEP THE BATTERY AWAY FROM HIGH
HEAT SOURCES OR SPARKS, SPECIALLY WHEN THE
BATTERY IS BEING CHARGED, BECAUSE THE HYDRO-
GEN RELEASED CAN BE HIGHLY EXPLOSIVE.
Dashboard
KEY:
1. Service indicator
2. Oil pressure gauge
3. Digital clock
4. Coolant temperature gauge
5. Multifunction digital computer
6. Multifunction indicator: total odometer (ODO) /
trip odometer (TRIP) / battery voltage «A»

USER INTERFACE

Multifunction indicator functions
Several functions can be selected with the MODE «2» button on the handlebar right side control: clock
adjustment, the total odometer (ODO) function, the trip odometer (TRIP) function, battery voltage read-
ings and trip odometer reset.
Total odometer (ODO) function
When the instrument panel lights on, the multifunction display «1» shows the odometer (ODO) function.
Trip odometer (TRIP) function. When the odometer (ODO) function is displayed, press the MODE «2»
button once to view the TRIP function. Press the MODE «2» button longer than three seconds to reset
the counter of the trip times stored.
Battery voltage
When the odometer (ODO) function is displayed, press the MODE «2» button twice to view the battery
voltage.
Unit of measurement - km/mi conversion
When the battery voltage is shown on the multifunction display «1», the unit of measurement can be
shifted form kilometres (km) to Miles (mi) by holding down the MODE «2» button longer than ten sec-
onds. While the button is being pressed, the legend of the unit of measurement being used flashes.
Unit conversion is cancelled if the button is not pressed within ten seconds.
ELE SYS - 68

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents