Derbi Rambla 250 Manual page 75

Engine from vehicle
•
Undo and remove the three fixing
screws of the exhaust silencer.
•
Remove the exhaust system.
Removal of the engine from the vehicle
Preventively remove:
•
Helmet compartment.
•
Rear central cover.
•
Right and left fairings.
•
Tail section.
•
Muffler silencer.
•
Rear brake calliper.
•
Throttle body.
•
Remove the footrest lower protection
by sliding it upwards and turning it.
•
Get a container of adequate capacity
to collect the fluid and place it under the
cooling system pump.
•
Remove the expansion tank cap.
•
Loosen the clamp and remove the ra-
diator - pump pipe and allow the cool-
ant to drain into the collecting contain-
er.
•
Undo the screw and remove the cable
guide.
ENG VE - 75