Download  Print this page

Advertisement

Table of Contents
Suspensions
OIL EMPTYING
Place the sleeve in a vice fitted with protection
jaws (aluminium).
NOTE
GET A COLLECTING CONTAINER BEFORE CARRYING
OUT THESE OPERATIONS.
CAUTION
THE WHEEL HOLDER STEM SLEEVE UNIT CONTAINS
OIL. DO NOT TURN IT OVER OR TILT IT TOO MUCH WHEN
REMOVING IT.
Remove the upper closing cap.
Lower the pumping element until the
Seeger ring «1" can be removed.
Remove the Seeger ring «1".
Remove the cap and the O-ring.
SUSP - 198

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: