Server (Rear View) - Fujitsu PRIMERGY TX300 S4 User Manual

1.3.2 Server (rear view)

f
g
i
j
k
m
a Power supply unit
When using a Power Supply Conversion kit, the redundant function for power supply units takes
effect since two power supply units are installed. The power supply unit 1 is on the right side and
the power supply unit 2 is on the left side.
b Power connector
Connect a cable of a power supply unit.
c Power supply unit LED (For redundant power supply only)
This LED is lit, depending on the power supply status as follows.
LED status
Green
Amber
Off
d Power supply unit failure LED (For redundant power supply only)
The LED indicates the power supply unit status as follows.
LED status
Amber
Off
e Parallel port (option)
Install an optional parallel port.
a
b
e
h
o
l
n
table: Power supply unit LED
Power supply status
Normal status (operating mode)
Normal status (standby mode)
Power not supplied (power off)
table: Power supply unit failure LED
Power supply unit status
Failure
Power off or operating mode
PRIMERGY TX300 S4 User's Guide
[For Power Supply Conversion kit]
a
b
c
p
d
25