Server (Rear View) - Fujitsu PRIMERGY RX300 S3 User Manual

Chapter1 Overview

1.3.2 Server (Rear View)

[Standard card slot]
a b
[With basic card slot conversion mechanism]
a Power supply unit 1 (installed as standard)
One power supply unit is installed by default. Up to two units can be installed.
Adding a power supply unit enables the redundant power supply function.
b Power supply unit failure LED
The LED indicates the power supply unit status.
LED status
Lights amber
Off
c Power status LED
This LED is on, depending on the power supply status as follows.
LED status
Lights green
Lights amber
Off
d Power supply unit 2 (Option)
e Mouse connector (6 pins) (
A mouse is plugged in.
f PCI slot
g Inlet
Power cables are plugged in.
24
c d e
g h i
table: Power supply unit status
Power supply unit status
When a power supply unit fails
Normal mode or power off
table: Power supply status
In normal mode (operating mode)
In normal mode (standby mode)
Power not supplied (power off)
)
m n
j k l
Power supply status
f