Installation Locations Of Internal Hard Disk Units; Installable Internal Hard Disk Units And Notes - Fujitsu Primergy RX300 S4 User Manual

6.6.1 Installation Locations of Internal Hard Disk Units

Install the internal hard disk unit in a 3.5-inch storage bay at the front of server. Up to six units can be
installed.
When an internal backup device is installed, a maximum of four internal hard disk units can be installed.
Slot numbers that are displayed in RAID management software etc. are described in the locations where
hard disk units are installed.
Bay 3 (Slot Number 2)
Bay 2 (Slot Number 1)
Bay 1 (Slot Number 0)
Installation order
Install the internal hard disk units in the 3.5-inch storage bays in the following order.
Status of the 3.5-inch storage bay
Standard installation
When an internal backup device is
installed (using bays 2 and 3)

6.6.2 Installable Internal Hard Disk Units and Notes

Installable internal hard disk unit
Product name
HDD SAS 15k 73GB hot plug 3.5inch
HDD SAS 15k 147GB hot plug 3.5inch
HDD SAS 15k 300GB hot plug 3.5inch
Before installing an internal hard disk unit, see "Appendix B.4 Internal Hard Disk Units" ( p.248) to
check the packaged contents.
table: Installation order of internal hard disk units
Bay 4 – Bay 5 – Bay 6 – Bay 1– Bay 2 – Bay 3
Bay 4 – Bay 5 – Bay 6 – Bay 1
table: List of installable hard disks
Product ID
PG-HDB75A
PG-HDB45A
PG-HDB35A
PRIMERGY RX300 S4 User's Guide
Bay 6 (Slot Number 6)
Bay 5 (Slot Number 5)
Bay 4 (Slot Number 4)
Installation order
Remarks
73.4GB, 15,000rpm, SAS 3.5-inch,
hot plug support
146.8GB, 15,000rpm, SAS 3.5-inch,
hot plug support
300GB, 15,000rpm, SAS 3.5-inch,
hot plug support
165