Installation Location Of Internal Hard Disk Units; Installable Internal Hard Disk Units And Notes - Fujitsu PRIMERGY TX120 User Manual

Chapter 7 Installing Hardware Options

7.5.1 Installation Location of Internal Hard Disk Units

Install internal hard disk units in 2.5-inch storage bay.

7.5.2 Installable Internal Hard Disk Units and Notes

Before installing an internal hard disk unit, check the following points.
Installable internal hard disk units and installation order
The following types of SAS hard disks can be installed in this server. The internal hard disk unit should
be installed in descending order of the capacity from bay 1 – bay 2.
Note that the hard disks with the same capacity (the same product ID) should be installed in the bay 1
and bay 2 when configuring the array system.
Product name
HDD SAS 10k 73GB hot plug 2.5inch
HDD SAS 15k 73GB hot plug 2.5inch
HDD SAS 10k 147GB hot plug 2.5inch
134
2.5-inch internal hard disk unit bay 2
2.5-inch internal hard disk unit bay 1
table: Installable internal hard disk units
Product ID
PG-HDD71B
PG-HDD75B
PG-HDD41B
Overview
73GB, 10,000 rpm, SAS
2.5 inch, hot-pluggable
73GB, 15,000 rpm, SAS
2.5 inch, hot-pluggable
147GB, 10,000 rpm, SAS
2.5 inch, hot-pluggable