Installation Locations Of Internal Hard Disk Units; Installable Internal Hard Disk Units And Notes - Fujitsu PRIMERGY RX200 S4 User Manual

6.7.1 Installation Locations of Internal Hard Disk Units

Install internal hard disk units in the storage bays at the front of the server.
The slot number that is displayed in the RAID management software etc. is described in the location
where the hard disk is installed.
For 3.5-inch storage bays
[Front of the server]
Bay 1 (Slot number 0)
Install the internal hard disk units in the order of Bay 1 and Bay 2.
For 2.5-inch storage bays
[Front of the server]
Bay 2 (Slot Number 1)
Bay 1 (Slot Number 0)
Install the internal hard disk units in the order of Bay 1 – Bay 2 – Bay 3 – Bay 4.

6.7.2 Installable Internal Hard Disk Units and Notes

Installable internal hard disk units
The following internal hard disk units can be installed on this server.
For SAS model (3.5-inch storage bays)
Product name
HDD SAS 15k 73GB hot plug 3.5inch
HDD SAS 15k 147GB hot plug 3.5inch
HDD SAS 15k 300GB hot plug 3.5inch
Bay 2 (Slot number 1)
CD/DVD drive (optional)
Bay 4 (Slot Number 3)
CD/DVD drive (optional)
Bay 3 (Slot Number 2)
table: List of installable internal hard disk units
Product ID
PG-HDB75A
PG-HDB45A
PG-HDB35A
PRIMERGY RX200 S4 User's Guide
Overview
73.4GB, 15,000rpm, SAS 3.5-inch,
hot plug support
146.8GB, 15,000rpm, SAS 3.5-inch,
hot plug support
300GB, 15,000rpm, SAS 3.5-inch,
hot plug support
165