Cash-In-Drawer Limit Programming - Sam4s ER-285M Operator's Manual

Cash-In-Drawer Limit Programming

You can set a limit for cash in drawer. When cash in drawer exceeds the limit you program
here, a warning will display on the screen. You must press CLEAR to remove the warning
and continue operations. The warning will continue to appear at the completion of every
transaction with the limit exceeded, until you use the PAID OUT function to remove cash
from the drawer.
Programming the Drawer Limit
SAM4s ER-285M Operator's and Program Manual v1.4
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 1 0 0, press the SUBTOTAL key.
1 1 0
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME
key.
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finalize the program.
CASH
SUB
0
TOTAL
X/TIME
Program Mode Reference Guide • 191