Sam4s ER-285M Operator's Manual page 111

To Set Memory Allocation
NOTE: The number of clerks cannot exceed the number of checks allocated. For
example, if you wish to allocate 20 clerks, you must also allocate at least 20 checks.
SAM4s ER-285M Operator's and Program Manual v1.4
1. Turn the control lock to the S position.
2. Enter 60, and then press the SUBTOTAL key.
SUB
6 0
TOTAL
3. Refer to the chart below. Enter the index number and press the X/TIME key.
X X/TIME
X Memory Area
1 PLU
2 CLERK*
3 GROUP
4 CHECK#*
5 SOFT CHECK LINE
6 CHECK TYPE : Hard (1), Soft (0)
7 PRICE LEVEL
8 MIX AND MATCH
9 ELECTRONIC JOURNAL
4. Enter the quantity to allocate for the memory item and press the CASH key.
Quantity
5. If you wish to allocate another memory area, repeat steps number 3 and 4.
6. Press CASH to exit the memory allocation program. The current allocation
will print.
CASH
CASH
Service Mode Reference Guide • 111