Sam4s ER-285M Operator's Manual page 187

Programming the Clerk Report Message
The Clerk Report selection allows you to reprogram the descriptors that appear with the Clerk
Report totals and counters. For example, the first total on the clerk report "NET SALES"
might be re-labeled to say "GROSS SALES". You can reprogram any of the Financial Report
totals listed here with any 18-character descriptor. (See "Clerk Report Message").
SAM4s ER-285M Operator's and Program Manual v1.4
1. Turn the control lock to the PGM position.
2. To begin the program, enter 7 1 0, press the SUBTOTAL key.
7 1 0
3. Refer to the chart below and enter the number that represents the line you wish
to program; press the X/TIME key.
X X/TIME
4. If you are programming
Enter up to 18
three-character
codes
5. Press the CASH key to finalize the program.
CASH
SUB
TOTAL
SUB
TOTAL
Program Mode Reference Guide • 187