Function Key Programming - Sam4s ER-285M Operator's Manual

Function Key Programming

Three programs are used to program function keys:
In this chapter you will find:
SAM4s ER-285M Operator's and Program Manual v1.4
•
Program 70 - is used to set each keys individual options
•
Program 80 - is used to program a 18 character alpha numeric descriptor
•
Program 90 - is used to set a high amount limit (HALO)
•
General instructions for programs 80 and 90.
•
Individual Program 70 option programming for each function key (options vary
by function)
Program Mode Reference Guide • 147