Clerk Sign-On/Sign-Off; Direct Sign-On; Coded Sign-On - Sam4s ER-285M Operator's Manual

Clerk Sign-On/Sign-Off

See "System Option Programming" to review your clerk options:
•
•
Depending on how your machine has been programmed, sign-on will take place only at the
beginning of a shift (stay-down), or may have to be repeated for each transaction (pop-up). If
your machine has been programmed for stay-down clerks, the clerk currently signed on must
be signed off before another clerk may be signed on.
Check with your store manager to see which options have been selected for your register.
Before any transaction may take place, a clerk must be signed on. Clerk sign-on is
accomplished in one of two ways:

Direct Sign-On

To sign on a clerk, enter the clerk number and press the clerk key.
To sign the clerk off, enter 0 (Zero) and press the clerk key.

Coded Sign-On

To sign on a clerk, press the clerk key, enter the clerk code, and then press the clerk key
again.
To sign the clerk off, enter 0 (Zero) and press the clerk key.
58 • Operator Reference Guide
System option #2 allows you to select direct or code entry sign on
System option #3 selects stay-down or pop-up operation.
CLERK
0 CLERK
CLERK
Clerk Code (up to 6 digits)
0 CLERK
CLERK
SAM4s ER-285M Operator's and Program Manual v1.4