Display; Control Lock - Sam4s ER-285M Operator's Manual

Display

The ER-285M is equipped with a liquid crystal screen, allowing you to view up to 2 lines of
information with up to 16 characters per line. The display is backlit for easy viewing in all
light conditions.
When the control lock is in the OFF position, the register cannot be operated. When the
control lock is in the REG, VOID, X, Z, PGM positions, the appropriate messages are
displayed.
When the register is in an error condition, a text message describing the error will display.

Control Lock

The control lock has 7 positions, accessed with 5 keys. Each ECR is shipped with two full
sets of keys.
VOID
Before performing any operations in Register Mode a clerk must be signed on. See "Clerk
Sign-On/Sign-Off" for a description of clerk operations.
Control Keys
The ER-285M includes two sets of keys that may be used to access the following control lock
positions.
Note: Keys may be removed from the control lock in the OFF or REG positions.
SAM4s ER-285M Operator's and Program Manual v1.4
OFF
VOID Use to void (correct) items outside of a sale.
REG
OFF
X
REG
X
Z
Z
PGM
PGM Use to program the register.
S S
Key Positions Accessible
REG
VOID VOID, OFF, REG, X
Z VOID, OFF, REG, X, Z
VOID, OFF, REG, X, Z,
P
C
The register is inoperable.
Use for normal registrations.
Use to read register reports.
Use to read register reports and reset totals to zero.
The S position is a hidden position reserved for
dealer access.
OFF, REG
PGM
ALL POSITIONS
Quick Start Guide • 15