Function Key Assignment Programming - Sam4s ER-285M Operator's Manual

Function Key Assignment Programming

Function keys may be relocated, inactivated or changed with this program. For example, you
may wish to place functions, such as PREVIOUS BALANCE and SERVICE that are not
placed on the default keyboard. Or perhaps, you may wish to remove a function, such as
CANCEL, for security reasons.
Please note the following limitations:
•
•
To Assign a Function Key to a Location
SAM4s ER-285M Operator's and Program Manual v1.4
If you assign a duplicate of a function code, the duplicate will function exactly as
the original - you will not get separate totals and counters on reports for the
duplicated key.
You can reassign keys only in locations that are programmable. See "Default
Keyboard", where the key locations that may be programmed are identified.
1. Turn the control lock to the S position.
2. Enter 70, and then press the SUBTOTAL key.
SUB
7 0
TOTAL
3. Refer to "Function Key Code Chart" to find the code for the key you wish to
assign, press the location you wish to program. Repeat this step to assign
another key.
Key Code
4. Press CASH key to finalize key assignment program.
CASH
Key
Location
Service Mode Reference Guide • 113