Default Programming; Descriptor Programming Methods - Sam4s ER-285M Operator's Manual

Default Programming

Each SAM4s ECR is ready to use after un-boxing, loading the paper and completing the
memory all clear procedure (see "Quick Start Guide" on page 13.)
•
•
•

Descriptor Programming Methods

Descriptors are programmable for PLUs, function keys, groups, clerks and the logo/messages.
There are two methods available to program descriptors, the program Program Overlay
Method, and the Descriptor Code Method. The method you use will depend upon the setting
you make at system option #32.
Descriptor Program Overlay
Note: The overlay depicted here is not actual size. See your SAM4s dealer for actual
size overlays and key sheets.
F
E
D
C
B
A
120 • Program Mode Reference Guide
All keyboard PLUs are nontaxable and preset, with a "0" price and a default
status programming of "00000000".
All system options are set to 0 in default programming, unless otherwise noted.
Change only the options that will deviate from default programming. There is no
need to re-enter an option status of 0, since 0 is its original setting.
All programming (unless otherwise noted) is done with the control lock in the
PGM position. Each section details a specific area of register programming.
S
L R
K Q
J P
I O
H N
G M
U W Z
T V Y
X
7 8 9
4 5 6
1 2 3
0 00 .
SAM4s ER-285M Operator's and Program Manual v1.4
BACK
SPACE
SPACE
DOUBLE
CAPS