Sam4s ER-285M Operator's Manual page 24

Programming a Tax Rate Percentage
1. Turn the control lock to the PGM position.
2. Enter the rate, with a decimal: 0.000-99.999. It is not necessary to enter proceeding
3. Enter 00.
4. Enter the number of the tax rate you are programming (1-4).
5. Press the TAX key.
6. Press the CASH/TEND key to end programming.
Tax Rate Programming Flowchart
Please Note: After programming the tax rate, you must program the PLUs taxable to
calculate tax. Go to the next page for PLU programming steps.
Tax Rate Programming Examples
If tax 1 is 6 percent, enter:
If tax 2 is 7.5 percent, enter:
Press the CASH/TEND key to end programming.
The rates you have entered will display and print on the printer:
24 • Quick Start Guide
zeros. For example, for 6%, enter 06.000 or 6.000.)
.
Tax Rate
6 . 0
7 . 5
CASH/
TEND
0
0 0 0 0
0 0 0 0
DATE 03/09/2007 FRI TIME 01:32
******* TAX PROGRAMMING *******
--------------------------------
TAX1
ADD-ON AT
TAX2
ADD-ON AT
CLERK 1 000046
SAM4s ER-285M Operator's and Program Manual v1.4
0 TAX
Tax #
(1-4)
1 TAX
2 TAX
6.000%
7.500%
00000
CASH/
TEND