Program 250 - Plu Stock Amount Programming - Sam4s ER-285M Operator's Manual

Program 250 - PLU Stock Amount Programming

With this program, you can you can add stock to the PLU sales counters for PLUs you have
designated as stock keeping PLUs. See "Program 100 – PLU Status Programming". The
stock number set here can be the amount of stock that is being added to the current level, or
optionally, it can be the new total stock level. See option #18 in "System Option
Programming" to set this option.
Note: Stock is kept in decimal units. When entering stock, you must assume a decimal
position in the second position, i.e. xxxx.xx. For example, 100 is entered as 10000, or
forty three and three quarters is entered as 4375.
SAM4s ER-285M Operator's and Program Manual v1.4
1. Turn the control lock to the PGM position.
2. To begin the program, enter 2 5 0, press the SUBTOTAL key.
2 5 0
3. Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU key on the keyboard, or
PLU
•
Press the first PLU keys that are to receive the same status and Press the
last PLU keys, or
PLU PLU
•
Enter up to 15 digit number of the PLU and press the PLU key, or
Enter the PLU#,
up to 15 digits
•
Enter the number of the first PLU in a range of PLUs that are to receive the
same setting; press the PLU key. Enter the last number in the range; press
the PLU key.
Enter the PLU#,
up to 15 digits
4. Enter the stock amount you wish to add (up to six digits), press the X/TIME
key.
Stock Amount
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH
SUB
TOTAL
PLU
Enter the PLU#,
PLU
up to 15 digits
X/TIME
Program Mode Reference Guide • 133
PLU