Clerk Programming; Program 800 - Secret Code Programming - Sam4s ER-285M Operator's Manual

Clerk Programming

Clerks (which may be used as cashiers), have the following programming options. These
options are set through separate programs:
•
•
•

Program 800 - Secret Code Programming

SAM4s ER-285M Operator's and Program Manual v1.4
Program 800 - Secret Code programming determines the code that is used for
clerk sign on if a code entry sign on method is selected in system option #2 (See
"System Option Programming")
Program 801 – Drawer Assignment & Training Clerk Programming
Program 810 - Clerk Description Programming allows you to set a unique, up to
18 character, descriptor for each clerk
1. Turn the control lock to the PGM position.
2. To begin the program, enter 8 0 0, press the SUBTOTAL key.
8 0 0
3. Enter the number of the clerk you wish to program; press the X/TIME key.
X/TIME
4. Enter a secret code (up to 10 digits); press the SUBTOTAL key.
Enter the secret
code, up to 10
digits
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to
finalize the program.
CASH
SUB
TOTAL
SBTL
Program Mode Reference Guide • 175