Scale Tare Weight Programming - Sam4s ER-285M Operator's Manual

Scale Tare Weight Programming

A tare is the amount of weight representing the container, or package when items are sold by
weight. You can pre-program five tare weights, representing the weight of different
containers. When you place an item and a container on optional scale, you can enter the tare
number to automatically subtract the pre-programmed tare weight. If you choose to use tare
#5 for manual tare weight entry, do not enter a weight for tare #5. (See TARE.)
194 • Program Mode Reference Guide
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 4 0 0, press the SUBTOTAL key.
1 4 0
3. Enter the number (1-5) of the tare you wish to program; press the X/TIME key.
X/TIME
4. Enter the weight of the tare (one digit preceding the decimal key, the decimal
key, and then three digits after the decimal key). Press the SUBTOTAL key.
.
5. To program additional tare weights, repeat from step 3, or press the CASH key
to finalize the program.
CASH
SUB
0
TOTAL
SUB
TOTAL
SAM4s ER-285M Operator's and Program Manual v1.4