Sam4s ER-285M Operator's Manual page 26

To Program Tax & Preset Status
First
Digit
Second
Digit
26 • Quick Start Guide
1. Turn the control lock to the PGM position.
2. Enter 100, press the SUBTOTAL key.
3. Select the PLU you wish to program in one of the following ways:
•
Press a PLU key on the keyboard, or
1
•
Enter the PLU # (up to15-digits) and press the PLU key
Enter the PLU#,
up to 15 digits
4. Determine the two-digit entry from the chart below. Answer each question and
enter the value that represents your answer in the "=" column. Add the values
for the first three questions to determine the first digit entry; add the values for
the second three questions to determine the second digit entry.
Enter the two digits and press the X/TIME key.
X/TIME
PLU Option
1. PLU is preset?
2. Allow preset override?
3. PLU is taxable by rate 1?
1. PLU is taxable by rate 2?
2. PLU is taxable by rate 3?
3. PLU is taxable by rate 4?
Examples:
For a preset PLU taxable by rate 1: enter 40,
For a non-preset PLU (open PLU) that is non-taxable: enter 10,
For a preset PLU without override,taxable by rate 1 and rate 2: enter 61
5. Repeat steps 3 and 4 for each PLU you wish to program.
6. Press the CASH/TEND key to end programming. The tax status you have
entered will display and print on the printer.
CASH/
TEND
PLU
Value
Yes = 0
No = 1
Yes = 0
No = 2
Yes = 4
No = 0
Yes = 1
No = 0
Yes = 2
No = 0
Yes = 4
No = 0
SAM4s ER-285M Operator's and Program Manual v1.4
= SUM